MOMFAB60C071 – FACILE GLAZED MONOBLOCK WITH TWO ENTRANCE
TOTALS EXT.DIM.:mm6035x2435x2975H
TOTALS INT.DIM.:mm5897x2275x2500H
SUPERIMPOSABLE: GROUND+2
WEIGHT OF SIMPLE MODULE:KG 1900
STRUCTURE:
It is fully realized by Steel galvanized tubulars category S.355 comply with UNI EN 10219 rules,steel galvanized roof profiles realized by steel galvanized S250 comply with UNI EN 10346. RAL 7035 white-colour
FLOOR:
WALKING AREA MADE BY NON-SLIP PVC THICKNESS mm1,5 fixed up WATERPROOF CHIPBOARD PANELS having a thickness of 22mm. Insulation is provided by layers of polystirene having a thickness of 60mm; STEEL GALVANIZED SHEET-thickness mm1. FORKSLIFT PREDISPOSITION KIT (WIDE TYPE) INSTALLED UNDER THE FLOOR CHASSIS
COLUMNS:
They are realized by tubulars mm80x80x4 with 8 holes each to ensure the connection between The floor chassis and the roof chassis. RAL 7035.
CONNECTING PIECES:
They are realized by tubular mm70x70x6.
ROOF:
It is realized into structural cold-formed steel galvanized profiles, thickness mm3 on 4 sides. Equipped with no.4 lifting points in the corners and no. 4 rainwater drainage points. Insulation made by sandwich panels,mm30 thickness in the flat part, thickness mm70 in the fret part, polyurethane foam, two layers of fiberglass thickness mm50+50 CEILING realized into pre-painted metal sheet ,staved finish.
EXTERNAL WALLS:
01 LONG SIDE
OUTER CLADDING MADE BY A METAL SHEET WITH A STAVED FINISH AND DESIGN LIKE WOOD
THREE FULLY GLAZED SIDES
They are made by sandwich panels external side having a pre-painted metal sheet C21 colour, embossed finish, polyurethane foam, internal side having a pre-painted metal sheet C21 colour smooth finish, Male and Female joint in PVC. PANELS WIDTH:mm980/mm1200. THICKNESS:60mm
INTERNAL WALL PARTITION TO CREATE TWO SEPARATE ROOMS
FIXTURES: ALUMINIUM/PVC SILVER COLOUR EQUIPPED WITH VENETIAN CURTAINS
02 GLAZED EXT. DOORS dim. cm130x240H;
02 FIXED GLAZED cm220x240H(INSTALLED IN THE TWO SHORT SIDES)
02 FIXED GLAZED cm160x240H(INSTALLED IN THE FRONT SIDE OF THE MONOBLOCK)
ELECTRIC INSTALLATION:
SPOTLIGHTS ON CEILING SLATS;
04 x 10-16A SOCKETS;
02 SWITCHES;
02 SPLIT/INVERTER AIR CONDITIONER 9000btu model+ A/C SOCKET;
01 BOX FOR CONNECTION OF ELECTRICAL HEATER;
01 ELECTRICAL PANEL INSTALLED INTO “CEILING” AND GROUND WIRING






